Video surveillance · High-end residential & commercial

Security Camera Systems With Clarity Operators Trust

High-resolution IP video with facial recognition, AI-assisted detection, and recording platforms designed for real coverage on luxury estates and commercial campuses—not brochure megapixels. We engineer enterprise analytics for staffed sites or unified camera stacks tied to doors and network that stay usable at 2 a.m.

Serving premier Southern California markets — see all service areas →

Better Visibility, Faster Verification

Cameras only earn their keep when they answer questions quickly: Who is at the gate? Have we seen this person before? Did someone enter after hours? Which vehicle used the driveway? That requires the right optics for distance, night performance for Southern California outdoor conditions, storage that matches retention policy, and software—including facial recognition and smart search—that finds the clip without scrubbing hours of video.

Nelson Security designs surveillance as part of the full stack—linked to biometric and face-capable access, intrusion trips, and network capacity—so alerts come with context, not noise.

Facial Recognition & Identity Analytics

Know who is on site faster—and review incidents without scrubbing every camera by hand.

Face Recognition That Operators Use

On supported platforms, we enable facial recognition and face labeling so known residents, staff, or flagged persons surface in real time—and so investigations start with “find this face” instead of endless playback. Designed with enrollment rules, access permissions, and camera angles that actually capture faces.

  • Known-person alerts at gates, lobbies, and key approaches
  • Face search across cameras for incident review
  • Enrollment and label control for admins
  • Optics and lighting planned for identification, not just motion

Tied to Access & Privacy

Facial video analytics pair cleanly with biometric and face-capable door systems: verify who should be at an entry, investigate tailgating, and keep guest credentials separate from resident identity. We also design neighbor-aware views, retention rules, and role-based who can search faces.

  • Door event + face correlation on supported stacks
  • Privacy-aware placement on residential estates
  • Local recording options that keep footage under your control
  • Clear admin roles for who can enroll and search

Camera & Video Capabilities

4K / Multi-Sensor Coverage

Bullets, domes, turrets, panoramics, and PTZ where long-range control matters—placed for identification, not just “presence.”

Facial Recognition

Face detection, known-person labeling, and search tools so staff and residents can verify who was on site—and find them across cameras fast.

AI Analytics That Reduce Noise

Person and vehicle detection, smart search, and policy-based alerts so operators act on signal instead of constant motion spam.

License Plate Recognition

Purpose-built LPR at gates and lots with lighting and angle designed for plate capture—not a generic camera hoping for the best.

Recording & Retention

NVR/VMS design with realistic bitrate math, redundant options, and retention that matches insurance, HR, or estate preferences.

Discreet Residential Installs

Hidden pathways, color-matched housings, and viewpoints that protect privacy lines while covering what matters.

Two Proven Paths—Chosen Per Property

Enterprise Video for High-End & Guard-Staffed Sites

For campuses, production facilities, and properties with security operations, we deploy enterprise-class cameras and video management with advanced analytics, appearance and face search workflows, and integration to biometric access control. Built for faster verification when staff are watching live and reviewing incidents under pressure.

  • Broad camera portfolio for every angle and lighting challenge
  • Facial recognition and appearance search for proactive detection
  • Access + video event correlation for door incidents
  • Scalable multi-site operator experience

Unified Protect-Style Systems With the Network

When networking and physical security should share one fabric, we design unified camera systems with local recording, edge AI detections including face recognition on supported models, remote site management, and optional third-party camera adoption during migrations—without forcing cloud storage of private footage.

  • PoE camera deployments with clean switch design
  • Smart detections, face tools, and alarm automations
  • Local privacy-first recording with secure remote access
  • Same stack as access hubs and sensors when desired

Also available: Specialty optics, thermal where appropriate, and mixed-vendor recording strategies. We remain manufacturer-independent so the camera plan—and whether facial recognition is enabled—follows the architecture, risk model, and privacy preferences.

How We Design Coverage

1. Threat & View Study

Identify doors, driveways, dark corners, and “must identify” distances before picking models.

2. Network & Power Plan

PoE budgets, uplink capacity, VLAN strategy, and UPS so cameras stay up when the grid does not.

3. Policy & Privacy

Retention, who can search faces, neighbor privacy, enrollment rules, and export workflows for law enforcement or insurance claims.

Selected Work

Designed from the dirt up—not a pile of apps.

Project

Westside New Construction

The lot was stripped down to dirt in 2017, a year after design and engineering began — because on a project like this, the plan has to exist before the slab does. Most of the wiring runs the way it does in any build, through walls and attics, but Nelson Security also ran conduit under the slab to multiple key locations throughout the house, deliberately over-building capacity so more wire could be pulled later with minimal disruption. Between the basement equipment room and a key junction on the main floor, for example, four 2-inch conduit runs covered what the initial build needed; four more went in for whatever would come later. That "later" is now, and all eight runs are in use.

That discipline paid off before the family had even finished settling in. The lower level sits under a hillside with 24 inches of concrete overhead, below, and to the side — enough to swallow a cell signal whole. Once the owners moved in and found dead spots in that part of the house, the crew pulled a new run through conduit that was already in place and added a multi-zone cell repeater, without opening a single wall. The five-year runway between the first drawing and the final walkthrough in 2021 is exactly what made that possible.

Coordinating with the other trades mattered just as much as the plan itself — a house this size has a finite amount of ceiling and wall cavity, and every trade wants a piece of it. The window treatments were the sharpest example: dual shades on every window, with shade boxes that had to sit flush with the ceiling. That meant custom framing at every opening, and no two openings were quite alike — some shades sat side by side, some stacked, some were surface-mounted where a pocket wasn't an option.

Four racks in a 400-square-foot equipment room hold the network gear, AV switching, control processors, video servers, and battery backups that keep the system running. The backbone underneath the house is a fiber core running Cat6A and Cat7 out to 20 wireless access points and 10 PoE switches, feeding more than 300 network drops — over 10 miles of wire across every low-voltage system combined. On a normal day the network carries at least 175 connected devices, with the owners streaming across multiple devices at once — the kind of load that makes a properly built backbone the difference between a system that feels invisible and one that stutters.

Crestron sits at the center of daily life — 18 touch panels placed throughout the house handle lighting, shades, eight video zones and 24 audio zones of whole-home AV, camera viewing, and the Jandy pool and spa, including temperature and lighting. A video doorbell pops up on every panel with a notification tone and live two-way video. With more than 150 switches and over 300 lighting loads in the house, the owners rely on summary pages that show at a glance what's on and where, rather than walking room to room to check. The same logic runs security: all 200-plus alarm zones report to summary pages on the panels, so a door or window left open shows up immediately without a walk-through. Shades and lighting run on separate weekday, weekend, holiday, and holiday-with-guests schedules, tuned to how the family actually lives rather than a single default. Klipsch speakers cover the bedrooms, corridors, and media room, with Sonos bars in rooms that don't need full surround, and every AV zone has a programmable remote so one handset reaches every source. The media room runs a 100-inch Sony display with 9.1 surround. Outside, an outdoor TV and speakers across the grounds cover entertaining, and guests can stream straight from their phones or pull from the media server in the equipment room.

Security runs on Avigilon — more than 30 cameras and access control at multiple doors — paired with a Bosch alarm on every opening and custom scheduling that arms the system without the owners having to think about it. Additional hardening for the residents has also been implemented. A UniFi network carries Wi-Fi 7 to the edge of the property, and Grandstream video phones round out communications throughout the house.

None of it was a one-and-done install. Nelson Security has kept the house on a service contract since 2021 — firmware updates across every system, physical maintenance like cleaning and adjusting the cameras, and retuning schedules and scenes as the family's routines change. On a system this size, the way people actually live in it never quite matches the plan on day one, and the value is in catching that before it becomes a complaint.

Camera System FAQs

How do you design cameras so they answer who was at the gate—not just that something moved?

Coverage starts with a threat and view study: doors, driveways, dark corners, and must-identify distances before models are picked. Optics, night performance for Southern California outdoor conditions, retention that matches policy, and software—including facial recognition and smart search—find the clip without scrubbing hours of video. Camera count matters less than geometry and the network behind it.

When does facial recognition belong on a residence versus a staffed site?

On supported platforms we enable known-person alerts and face search where they earn their keep—gates, lobbies, and key approaches—with enrollment rules, neighbor-aware views, and role-based who can search. Staffed sites use it for faster verification; estates get privacy-aware placement. We do not enable it by default on every camera.

Do you use purpose-built license-plate cameras at gates?

Yes, when driveways, gates, and lots justify it. License-plate recognition is specified with lighting and angle designed for plate capture—not a generic camera hoping for the best. Person and vehicle analytics are added only when the use case and storage design support them.

How do recording and the network get sized so analytics do not starve footage?

Recorder design uses realistic bitrate math, PoE budgets, VLAN strategy, and UPS so cameras stay up when the grid does not. We do not bolt analytics onto an undersized recorder. Retention matches insurance, HR, or estate preferences—and local recording options keep footage under your control.

Enterprise video or a unified camera-and-network stack—how do you choose?

Enterprise video fits campuses and guard-staffed sites that need advanced appearance and face search under pressure. Unified stacks fit properties that want cameras, access, and networking under one operational model with local recording. We design either—or a hybrid transition—from our Thousand Oaks practice for residential and commercial work. Request a consultation.

Can some existing cameras stay during a migration?

Often partially. We evaluate image quality, cybersecurity posture, and protocol support before recommending keep, replace, or hybrid. Facial recognition typically needs capable sensors and platform support. Architecture-first design means we keep what still earns its keep.

Related Solutions

Priority Markets

High-end residential and commercial projects across Southern California.

See farther. Decide faster.

Design Video That Actually Answers Questions

(866) 707-0927

By appointment only · Premier Southern California markets